Ref: 613

Brand: ModMaker

MM ClickFet v1

Review(s): 0

ClickFet v1 is an un-regulated board for use with up to 4.2v battery configurations and designed to fit in the smallest space possible.

Price $7.78
More
In stock
All best sellers
  • Payments

    Payments
  • New

MM ClickFet v1

613
Rating 

ClickFet v1 is an un-regulated board for use with up to 4.2v battery configurations and designed to fit in the smallest space possible.

ClickFet V1 Switch Options

Volume discounts

Quantity Discount You Save
10 5% Up to $0.00
50 10% Up to $0.00
100 15% Up to $0.00
250 20% Up to $0.00
$7.78
Quantity

 

Privacy policy

 

Delivery Information

 

Return / Refund Policy

Description

ClickFet v1 is an un-regulated board for use with up to 4.2v battery configurations and designed to fit in the smallest space possible. It has a built in N-channel mosfet capable of up to 100A current, 2 x blue LED and an intelligent chip to provide the on / off feature, low voltage detection, timeout and short protection. ClickFet v1 also has reverse polarity protection to protect the board.

MODDERS - Please understand that electronics and moisture don't mix well. If you are using these boards and there is a chance of them getting wet from juice please take precautions to keep them dry either with liquid insulation, hot glue or better placement of the boards.

Specifications
 - Dimensions: With Switch: 15mm x 12mm / Without Switch: 11mm x 10.5mm
 - Mosfet:- N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46v (typ)
 - Operational voltage: 3.1 ± 0.1V - 4.20v
 - Low voltage protection: 3.1 ± 0.1V
 - Reverse polarity protection: Yes. Mod will auto fire but board will not burn out.
 - Idle current: <10uA
 - Timeout Protection: Yes
 - Amp Limit: 46.67A (4.2v @ 0.09Ω)

Functions and LED Information
 - Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED's flash 3 times and will not power the mosfet. This is also Short Protection.
 - On/Off Function: When off, 5 clicks turns on and LED's flash 5 times. When on, 5 clicks turns off and LED's flash 5 times.
 - Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet.
 - Time Out Protection: If the mod is fired for 10 ± 1s the LED's will flash 8 times and will stop powering the mosfet.
 - Reverse Polarity Protection. If the battery is around the wrong way the mod will fire.
 - In Use: When powering the mosfet the LED will be on.

Product Details
613
Reviews

No customer reviews for the moment.

Write your review

Silicone Wire (20AWG-14AWG)

MM ClickFet v1

ClickFet v1 is an un-regulated board for use with up to 4.2v battery configurations and designed to fit in the smallest space possible.

Write your review
16 other products in the same category:

Ref: 174

Naos Raptor 60W 10A

Review(s): 0

The Naos Raptor NSR010A0X4Z 10A SIP power modules are non-isolated dc-dc converters in an industry standard package that can deliver up to 10A of output current with a full load efficiency of 89.6% at 3.3Vdc output voltage (VIN = 12Vdc).

Price €11.22
More
In stock

Follow us on Facebook