Ref: 629
Brand: ModMaker
Atty Stand 510s
Atty stand 510s with glue grooves for better adhesion inside stand material.
Ref: 629
Brand: ModMaker
Atty stand 510s with glue grooves for better adhesion inside stand material.
Ref: 25
Very popular silver tactile switch with a sphere actuator measuring approx 4mm diameter.
Ref: 692
Brand: ModMaker
510 drip tip blanks made from 304 stainless steel.
Ref: 613
Brand: ModMaker
Mosfet board with on off feature and protection
Ref: 555
Brand: ModMaker
Large positive nut for the MM510 Squonk version.
Ref: 560
Brand: ModMaker
Threaded tube to fit on MM510 squonker 510s
There are 395 products.
Ref: 629
Brand: ModMaker
Atty stand 510s with glue grooves for better adhesion inside stand material.
Ref: 25
Very popular silver tactile switch with a sphere actuator measuring approx 4mm diameter.
Ref: 692
Brand: ModMaker
510 drip tip blanks made from 304 stainless steel.
Ref: 613
Brand: ModMaker
Mosfet board with on off feature and protection
Ref: 555
Brand: ModMaker
Large positive nut for the MM510 Squonk version.
Ref: 560
Brand: ModMaker
Threaded tube to fit on MM510 squonker 510s
Ref: 486
Brand: Evolv
The DNA 60 is a power regulated digital switch-mode DC-DC converter for personal vaporizers.
Ref: 562
Brand: ModMaker
Designed to fit in the end of a 2mm inner diameter silicone tube
Ref: 531
Brand: ModMaker
MM LPDE Squonker Bottle kit is made from food grade LDPE and has nice thin walls making them soft. The kits comes with a stainless steel lid, a silicone washer and some silicon tubing.
Ref: 421
Brand: Evolv
Replacement screen from Evolv to fit the DNA40D, DNA60, DNA75, DNA200 & DNA250
Ref: 623
Brand: ModMaker
The 2nd Generation MM510 Standard Version
Ref: 587
Brand: ModMaker
The MM Silicone Squonk Bottle kits. Various shapes & sizes.
Ref: 711
Brand: ModMaker
The 2nd Generation MM510 Standard Version
Ref: 621
Brand: Evolv
Replacement screen for the DNA75C & DNA250C
Ref: 433
Stainless steel 12mm mushroom switch with a nice big actuator.
Ref: 581
Brand: ModMaker
Large positive nut for the MM510 Squonk version.
Ref: 169
The most used N-Channel mosfet in modding. Channel Type N Maximum Continuous Drain Current 343 A Maximum Drain Source Voltage 40 V Package Type TO-220AB Mounting Type Through Hole Pin Count 3 Maximum Drain Source Resistance 2 mΩ Channel Mode Enhancement Maximum Gate Threshold Voltage 2.5V Minimum Gate Threshold Voltage 1V Maximum...
Ref: 512
Brand: ModMaker
MM LPDE Squonker Bottle For replacing old LPDE Squonker Bottles and SuperSoft bottles.
Ref: 615
Brand: ModMaker
Free 3D Printed mount for purchases of the MM ClickFet v1 with Switch.
Ref: 241
Brand: ModMaker
A sheet of 67mm X 8mm vinyl stickers with permanent adhesive designed to fit into Keystone 18650 battery sled apertures although they can be used anywhere that you need to clearly show the orientation of a battery.
Ref: 622
Brand: ModMaker
510 Spanner Set. The sizes on this set are 11mm, 12mm, 13mm & 14mm
Ref: 592
Brand: Evolv
The DNA 250C is a power regulated digital switch-mode DC-DC converter for personal vaporizers.
Ref: 713
Brand: ModMaker
Mosfet board with on off feature and protection
Ref: 709
Brand: ModMaker
Perfect for DNA C Boards
Ref: 715
Brand: ModMaker
The 2nd Generation MM510 Standard Version
Ref: 243
Brand: Keystone
Pack of 4 Keystone 208 clips. Perfect for using on 3D printed sleds.
Ref: 553
Brand: Evolv
The DNA75C Color is a power regulated digital switch-mode DC-DC converter for personal vaporizers.
Ref: 569
Brand: ModMaker
Pack of 2 bott plugs for spare filled squonk bottles with silicone tubes.
Ref: 451
Very similar to the Otto P9 switches found on the HexOhm mods
Ref: 575
Brand: ModMaker
Available in stainless steel and brass. These battery tubes come with copper solder tabs and copper positive connection giving you the best contact material.This tube is made big enough to take 20700 and 21700 flat top batteries.The negative and positive solder tabs makes it easy to connect your wires and the bottom caps have finger holes for...
Ref: 242
Brand: Keystone
Pack of 4 Keystone 228 clips. Perfect for using on 3D printed sleds.
Ref: 115
Brand: Keystone
Genuine Keystone 1048 dual 18650 battery holders. They are made of heat resistant nylon and have gold plated contacts.
Ref: 624
Brand: ModMaker
The 2nd Generation MM510 Squonker Version
Ref: 248
Brand: Fat Daddy Vapes
This FDV V4 has a 1mm thick, 15.5mm diameter cap and short body.
Ref: 718
Brand: Keystone
Pack of 4 clips. Perfect for using on 3D printed sleds.
Ref: 215
Brand: Fat Daddy Vapes
Stainless Steel Flat Top FDV v4 510 connector
Ref: 214
Tiny metal PTC resettable fuses. These are so small, they will fit in anywhere.
Ref: 452
Pack of 10 M1.7x5mm stainless steel screws
Ref: 708
Brand: ModMaker
This set is made from SS304 and contains 1 large and 3 small actuators.
Ref: 704
Brand: ModMaker
Stainless Steel Domed 3 Piece Actuator Set (5mm Tall * 8mm/5mm Diameter)
Ref: 286
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
Ref: 619
Brand: ModMaker
Squonk refill cap designed to fit on 60ml Chubby Gorilla bottles.
Ref: 554
Brand: ModMaker
We are now giving these away for FREE. Order value must be over £20GBP excluding shipping.1 set per order. This set must be added to your shopping cart.
Ref: 573
Brand: ModMaker
Beryllium copper squonker strip connection kit. In unplated and silver plated.
Ref: 719
Brand: Keystone
Pack of 4 clips. Perfect for using on 3D printed sleds.
Ref: 244
Momentary switch made from stainless steel. Not to be confused with the miTEC and miTEC style clicky switches.
Ref: 620
Brand: ModMaker
Squonk refill cap designed to fit on most 120ml Chubby Gorilla bottles.
Ref: 572
Brand: ModMaker
Beryllium copper squonker strip connection kit. In unplated and silver plated.
Ref: 167
Pack of 10 15K carbon film resistors. Resistance is futile but necessary sometimes.
Ref: 705
Brand: ModMaker
Stainless Steel Domed 4 Piece Actuator Set (4mm Tall * 8mm/5mm Diameter)
Ref: 574
Brand: ModMaker
Available in stainless steel and brass. These battery tubes come with copper solder tabs and copper positive connection giving you the best contact material.This tube is made big enough to take 20700 and 21700 flat top batteries.The negative and positive solder tabs makes it easy to connect your wires and the bottom caps have finger holes for...
Ref: 585
Brand: ModMaker
The MM Silicone Squonk Bottle kits. Various shapes & sizes.
Ref: 283
Momentary switch. Not to be confused with the smaller miTEC style clicky switches.
Ref: 870
Brand: Evolv
The DNA100C Color is a power regulated digital switch-mode DC-DC converter for personal vaporizers.
Ref: 180
Brand: Fat Daddy Vapes
There is about 8mm of thread on the Woody making it ideal for mods made of wood or other thick material.
Ref: 703
Brand: ModMaker
Probably the most comfortable drip tip in the universe!
Ref: 149
Brand: Fat Daddy Vapes
The old school v4 510 connectors from Fat Daddy Vapes.
Ref: 237
Brand: miTEC
These momentary miTEC switches must have the smallest footprint of any 12mm switches I've seen. The action is clicky too so much like a tactile switch. They are made of stainless steel and ooze quality. Perfect for tight builds where you want a switch bigger than a tactile switch.