MM 18650x1 Mech Squonker 3D Printable Files

Here are the files needed to 3D print the MM 18650x1 Mech Squonker. This version takes the Dinky Cuboid or Dinky squonk bottles and has a cuboid design on it. It is designed for the MM510 V1 and has a 12mm hole for that 510 but a V2 can also be used.

If you are 3D printing this at home, you may need to clean the holes with a drill as the switch hole will probably sink slightly because of the orientation of the print and FDM printer limitations.

The parts needed to make a completed mod are:

A Squonk 510: MM510 V1 with a 22mm washer or a 22mm V2:
https://www.modmaker.com/mm510-v1-squonker-ss16mm05mm
https://www.modmaker.com/mm510-v2-squonker-ss16mm05mm
https://www.modmaker.com/mm510-v2-squonker-ss22mm1mm
https://www.modmaker.com/mm510-v2-squonker-black22mm1mm

6mm x 1.5mm Magnets to glue into the door
https://www.modmaker.com/neodymium-disc-magnets-6mm15mm

A short mech connection kit
https://www.modmaker.com/mech-connection-kit-shortcopper
https://www.modmaker.com/mech-connection-kit-shortsilver

You'll need to be able to cut the connection kit to size and basn a dimple in the negative part. We have this but anything can be used to make the dimple: https://www.modmaker.com/connection-dimple-punch-tool

3D Files

MM-Mech-Squonk-18650-Dinky-Cuboid-Design.zip

Here's a version with no texture. This version takes the Dinky squonk bottles and has no texture on the design. It is designed for the MM510 V1 and has a 12mm hole for that 510 but a V2 can also be used.

3D Files

MM 18650x1 Mech Squonk No Texture.zip