Ref: 629
Brand: ModMaker
Atty stand 510s with glue grooves for better adhesion inside stand material.
Ref: 613
Brand: ModMaker
Mosfet board with on off feature and protection
Ref: 241
Brand: ModMaker
A sheet of 67mm X 8mm vinyl stickers with permanent adhesive designed to fit into Keystone 18650 battery sled apertures although they can be used anywhere that you need to clearly show the orientation of a battery.
Ref: 711
Brand: ModMaker
The 2nd Generation MM510 Standard Version
Ref: 555
Brand: ModMaker
Large positive nut for the MM510 Squonk version.
Ref: 25
Very popular silver tactile switch with a sphere actuator measuring approx 4mm diameter.
Black voltmeter bezel
Privacy policy
Delivery Information
Return / Refund Policy
These bezels will make the 0.28` voltmeters in your mods look neater.
Simply cut a hole big enough to fit the bezel into, epoxy it to the case and your voltmeter will slot straight in. Then secure the voltmeter with another drop of epoxy.
The cutout needs to be approx 24.5mm x 12mm but because of the bezel lip, it can be slightly more.
The overall size of the bezel is 27mm x 14mm so as long as your cutout is less than this, it will work.
Ref: 285
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
Ref: 286
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
Ref: 434
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
Ref: 666
Smaller than the standard mini voltmeter boards
Ref: 615
Brand: ModMaker
Free 3D Printed mount for purchases of the MM ClickFet v1 with Switch.
Black voltmeter bezel
