Ref: 629
Brand: ModMaker
Atty stand 510s with glue grooves for better adhesion inside stand material.
Ref: 613
Brand: ModMaker
Mosfet board with on off feature and protection
Ref: 241
Brand: ModMaker
A sheet of 67mm X 8mm vinyl stickers with permanent adhesive designed to fit into Keystone 18650 battery sled apertures although they can be used anywhere that you need to clearly show the orientation of a battery.
Ref: 555
Brand: ModMaker
Large positive nut for the MM510 Squonk version.
Ref: 25
Very popular silver tactile switch with a sphere actuator measuring approx 4mm diameter.
Ref: 711
Brand: ModMaker
The 2nd Generation MM510 Standard Version
There are 439 products.
Ref: 624
Brand: ModMaker
The 2nd Generation MM510 Squonker Version
Ref: 703
Brand: ModMaker
Probably the most comfortable drip tip in the universe!
Ref: 626
Brand: Keystone
Pack of 4 clips. Perfect for using on 3D printed sleds and replacing contacts on Keystone and Blossom battery sleds.
Ref: 512
Brand: ModMaker
MM LPDE Squonker Bottle For replacing old LPDE Squonker Bottles and SuperSoft bottles.
Ref: 413
Tiny little DPDT slide switch good for fitting in very tight builds. This one is approx 8mm long and 4mm wide.
Ref: 285
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
Ref: 238
Brand: miTEC
These miTEC momentary switches must have the smallest footprint of any 16mm switches I've seen. The big brother of the MSW-1201The action is clicky too so much like a tactile switch. They are made of stainless steel and ooze quality. Perfect for tight builds where you want a 16mm switch.
Ref: 237
Brand: miTEC
These momentary miTEC switches must have the smallest footprint of any 12mm switches I've seen. The action is clicky too so much like a tactile switch. They are made of stainless steel and ooze quality. Perfect for tight builds where you want a switch bigger than a tactile switch.
Ref: 197
Keep it neat with these 15mm terminal blocks. Great for hiding your solder under a prototype board and easy to connect wires. These 15mm terminal blocks fit nicely into the holes on a prototype board as standard and have holes big enough to easily take 1.5mm cable.
Ref: 174
The Naos Raptor NSR010A0X4Z 10A SIP power modules are non-isolated dc-dc converters in an industry standard package that can deliver up to 10A of output current with a full load efficiency of 89.6% at 3.3Vdc output voltage (VIN = 12Vdc).
Ref: 909
Brand: ModMaker
Boro Flush Nut Drip Tip Blank made from 304 stainless steel.
Ref: 210
ÖLFLEX HEAT 180 SiF is silicone insulated stranded single core wire
Ref: 868
Brand: ModMaker
MM510 V1 Solder Rings (Pack of 5)This solder ring has a 12mm diameter hole for your 510.
Ref: 718
Brand: Keystone
Pack of 4 clips. Perfect for using on 3D printed sleds.
Ref: 704
Brand: ModMaker
Stainless Steel Domed 3 Piece Actuator Set (5mm Tall * 8mm/5mm Diameter)
Ref: 531
Brand: ModMaker
MM LPDE Squonker Bottle kit is made from food grade LDPE and has nice thin walls making them soft. The kits comes with a stainless steel lid, a silicone washer and some silicon tubing.
Ref: 286
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
Ref: 261
Brand: miTEC
These momentary switches must have the smallest footprint of any 16mm switches I've seen. The big brother of the MSW-1202.
Ref: 244
Momentary switch made from stainless steel. Not to be confused with the miTEC and miTEC style clicky switches.
Ref: 714
Brand: ModMaker
The 2nd Generation MM510 Squonker Version
Ref: 721
Brand: ModMaker
Our 3D printed dual 18650 battery sled. Choice of contact options.
Ref: 558
Brand: ModMaker
Beryllium copper squonker strip connection kit. In unplated and silver plated.
Ref: 276
ÖLFLEX HEAT 180 SiF is silicone insulated stranded single core wire
Ref: 517
Probably the smallest 16mm LED switch on the market with a really soft click.
Ref: 719
Brand: Keystone
Pack of 4 clips. Perfect for using on 3D printed sleds.
Ref: 705
Brand: ModMaker
Stainless Steel Domed 4 Piece Actuator Set (4mm Tall * 8mm/5mm Diameter)
Ref: 554
Brand: ModMaker
We are now giving these away for FREE. Order value must be over £20GBP excluding shipping.1 set per order. This set must be added to your shopping cart.
Ref: 421
Brand: Evolv
Replacement screen from Evolv to fit the DNA40D, DNA60, DNA75, DNA200 & DNA250
Ref: 248
Brand: Fat Daddy Vapes
This FDV V4 has a 1mm thick, 15.5mm diameter cap and short body.
Ref: 245
Momentary switch. Not to be confused with the smaller miTEC and miTEC style clicky switches.
Ref: 710
Brand: ModMaker
The 2nd Generation MM510 Squonker Version
Ref: 732
Brand: ModMaker
Our 3D printed dual 18650 battery sled. Choice of contact options.
Ref: 572
Brand: ModMaker
Silver plated beryllium copper squonker strip connection kit.
Ref: 211
ÖLFLEX HEAT 180 SiF is silicone insulated stranded single core wire
Ref: 520
Probably the smallest 16mm LED switch on the market with a really soft click.
Ref: 726
Brand: Keystone
Pack of 4 Keystone 5205 clips. Perfect for using on 3D printed sleds.
Ref: 708
Brand: ModMaker
This set is made from SS304 and contains 1 large and 3 small actuators.
Ref: 622
Brand: ModMaker
510 Spanner Set. The sizes on this set are 11mm, 12mm, 13mm & 14mm
