Ref: 629
Brand: ModMaker
Atty stand 510s with glue grooves for better adhesion inside stand material.
Ref: 613
Brand: ModMaker
Mosfet board with on off feature and protection
Ref: 241
Brand: ModMaker
A sheet of 67mm X 8mm vinyl stickers with permanent adhesive designed to fit into Keystone 18650 battery sled apertures although they can be used anywhere that you need to clearly show the orientation of a battery.
Ref: 711
Brand: ModMaker
The 2nd Generation MM510 Standard Version
Ref: 555
Brand: ModMaker
Large positive nut for the MM510 Squonk version.
Ref: 25
Very popular silver tactile switch with a sphere actuator measuring approx 4mm diameter.
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
Privacy policy
Delivery Information
Return / Refund Policy
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
Simply connect up the red wire to your positive and the black wire to the negative to display the voltage.
These have a tiny pot on the back for fine tuning if needed.
Voltage Range: 2.5V - 30V
Ref: 421
Brand: Evolv
Replacement screen from Evolv to fit the DNA40D, DNA60, DNA75, DNA200 & DNA250
Ref: 457
Brand: ModMaker
ModMeter V2. The P-Channel voltmeter, ohm meter wattage calculator board.
Ref: 434
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
Ref: 621
Brand: Evolv
Replacement screen for the DNA75C & DNA250C
Ref: 666
Smaller than the standard mini voltmeter boards
Ref: 258
Simply connect the white and red wires to your positive and your black to negative.
Ref: 286
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
Ref: 7
These are great little digital LED voltmeters. Simply connect up the positive and the negative wires to your power source to display the voltage.
Smaller than the standard mini voltmeter boards. The display is approximately 22.5mm x 10mm.
