Ref: 629
Brand: ModMaker
Atty stand 510s with glue grooves for better adhesion inside stand material.
Ref: 613
Brand: ModMaker
Mosfet board with on off feature and protection
Ref: 241
Brand: ModMaker
A sheet of 67mm X 8mm vinyl stickers with permanent adhesive designed to fit into Keystone 18650 battery sled apertures although they can be used anywhere that you need to clearly show the orientation of a battery.
Ref: 555
Brand: ModMaker
Large positive nut for the MM510 Squonk version.
Ref: 25
Very popular silver tactile switch with a sphere actuator measuring approx 4mm diameter.
Ref: 711
Brand: ModMaker
The 2nd Generation MM510 Standard Version
Fat Daddy Vapes 510 V3 connector.
Privacy policy
Delivery Information
Return / Refund Policy
Fat Daddy Vapes 510 V3 connector.
- Spring loaded with a direct solder point on the positive post.
- The spring is not part of the conduction.
- Comes with solder collars and hex nuts.
Please make sure you take the connector apart before you solder your wire to the positive pin or you will melt the insulator.
Optional 22mm locking washer (landing pad) or 28.5mm juice well.
Bottom Feeder pins and replacement cores are also available.
Ref: 218
Brand: Fat Daddy Vapes
22mm black top cap fits standard FDV 510 V4 Connectors
Ref: 149
Brand: Fat Daddy Vapes
The old school v4 510 connectors from Fat Daddy Vapes.
Ref: 220
Brand: Fat Daddy Vapes
22mm copper top cap fits standard FDV 510 V4 Connectors
Ref: 181
Brand: Fat Daddy Vapes
Compatible with the V3 Shorty and V3 Woody.
Ref: 182
Brand: Fat Daddy Vapes
Compatible with the V3 Shorty and V3 Woody.
Ref: 215
Brand: Fat Daddy Vapes
Stainless Steel Flat Top FDV v4 510 connector
Ref: 188
Brand: Fat Daddy Vapes
Converts most RDA with a single center posi post into a bottom feeder. No leaks or mess since it does not need seals on the actual 510 socket.So far, tested with Omega, TOBH and El Diablo (Mephisto).
Ref: 248
Brand: Fat Daddy Vapes
This FDV V4 has a 1mm thick, 15.5mm diameter cap and short body.
Ref: 186
Brand: Fat Daddy Vapes
Pack of 5 bottom feeder pins for the Fat Daddy Vapes 510 V3 Wood Body.
Ref: 430
This stainless steel catch cup is designed by us and uses the Fat Daddy Vapes v4 low profile 15.5mm 510 connectors in short and standard.
Ref: 180
Brand: Fat Daddy Vapes
There is about 8mm of thread on the Woody making it ideal for mods made of wood or other thick material.
Ref: 184
Brand: Fat Daddy Vapes
Replacement cores for the Fat Daddy Vapes 510 V3 Wood BodyThis comes in a pack of 3
Fat Daddy Vapes 510 V3 connector.
