Ref: 629
Brand: ModMaker
Atty stand 510s with glue grooves for better adhesion inside stand material.
Ref: 613
Brand: ModMaker
Mosfet board with on off feature and protection
Ref: 241
Brand: ModMaker
A sheet of 67mm X 8mm vinyl stickers with permanent adhesive designed to fit into Keystone 18650 battery sled apertures although they can be used anywhere that you need to clearly show the orientation of a battery.
Ref: 555
Brand: ModMaker
Large positive nut for the MM510 Squonk version.
Ref: 25
Very popular silver tactile switch with a sphere actuator measuring approx 4mm diameter.
Ref: 711
Brand: ModMaker
The 2nd Generation MM510 Standard Version
Enclosure mounting kit for the DNA75/200/250
Privacy policy
Delivery Information
Return / Refund Policy
This little 3D printed mount kit enables you to screw the DNA75/200/250 board to the mount which can then be glued or epoxied to the inside of the enclosure. It comes with 4 x M1.5 x 5mm self tapping screws to attach the board to the mount.
You can also drill out the holes and use some machine screws and bolts to hold it in place.
It has been designed so the display will locate in exactly the right place for the Evolv cutout dimensions. The screen will need to be stuck down with double sided foam tape to raise it to the correct height.
Enclosure mounting kit for the DNA75/200/250
